Reference Designs
Note
We are in the process of moving the reference design documentation from wiki.analog.com to ADI Documentation repository. We apologize for any inconvenience that may occur due to this migration.
Analog Devices has developed hundreds of reference designs to help solve our customers’ system level application challenges from mixed signal designs, to software drivers, and algorithm development.
Our development boards for Battery Management Systems (BMS), Gigabit Multimedia Serial Link (GMSL), and 10BASE-T1L applications are now available in the following pages:
-
Type 2 EVSE 3.6 kW Charging Cable.
-
Arduino Form-factor Development Platform Based on MAX32690 ARM Cortex-M4.
-
72 V to 96 V Battery Management System for Electric 2- and 3-Wheelers.
-
Cell and Pack Monitoring Kit for Broad Market Applications.
-
Ethernet-APL Field Platform for Intelligent, Secure, and Connected Industrial Devices.
-
AD9361 Wideband Software Defined Radio Board.
-
GMSL oLDI/LVDS to HDMI Adapter.
-
GMSL Carrier Board.
-
GMSL2-to-MIPI Deserializer Board for SoC Camera Systems.
-
GMSL2 Serializer Board for Raspberry Pi Cameras.
-
GMSL EV Kit Adapter Board.
-
Software-Defined Radio.
-
ADALM2000 BNC Adapter Board.
-
ADALM2000 Cable Assembly.
-
Long Range Wireless Radio Development Kit based on MAX32670 MCU and LR1110 RF Transceiver.
-
Long Range Wireless Radio Development Kit based on MAX32670 MCU and SX1261 RF Transceiver.
-
RF Front-end GaN Power Amplifier Biasing, Protection, and Control Reference Design.
-
Power Quality Analyzer.
-
PoE+ with Ideal Diode Bridge to Isolated Flyback DC/DC (12V, 2A).
-
2-port 10BASE-T1L Field Switch with SPoE PSE.
-
Software-configurable Analog and Digital I/O with 10BASE-T1L Evaluation and Development Platform.
-
Multichannel System Clocking Device.
-
Compact, Low Power, 12-Bit/16-Bit, 2 MSPS Easy Drive SAR ADCs.
-
Compact, Low Power, 12-Bit/16-Bit, 2 MSPS Easy Drive SAR ADCs.
-
ADALP2000 Analog Parts Kit.
-
60 GHz Wireless Connector.
-
The ADRD3161-01Z is an FOC motor driver board based on the TMC9660, capable of driving Stepper, BLDC, and brushed DC motors with optional quadrature (ABN) and/or Hall encoders. It communicates via CANopen CiA 402 over 500 kbaud CAN. For development, the TMC9660 may also be accessed directly via UART and thus controlled / configured via TMCL-IDE.
-
FPGA-based 8x GMSL to 10 Gb Ethernet Adapter.
-
Low Noise, Low Drift 3-axis Accelerometer PMOD Board.
-
8-channel, 12-Bit, Configurable ADC/DAC/GPIO with on-chip Reference, SPI Interface Pmod Module.
-
8-channel, 12-Bit, Configurable ADC/DAC/GPIO with on-chip Reference, I2C interface Pmod Module
-
8-Channel, Low Noise, Low Power, 24-Bit, Sigma-Delta ADC with PGA and Reference Pmod Board
-
MxFE™ Quad, 16-Bit, 12GSPS RFDAC and Quad, 12-Bit, 4/6 GSPS RFADC.
-
Apollo MxFE Quad, 16-Bit, 28GSPS RF DAC and Quad, 12-Bit, 20 GSPS RF ADC.
-
16-Channel Battery Stack Monitor Evaluation Board for Broad Market Applications.
-
Integrated Dual RF Tx, Rx, and Observation Rx.
-
Integrated, Quad RF Transceiver with Observation Path.
-
Integrated 2T2R TDD and FDD RadioVerse Transceiver with Dual Observation Paths.
-
Fully Automatic High Performance Conductivity Measurement System.
-
USB Powered 2.4 GHz RF Power Amplifier.
-
Universal Serial Bus (USB) Peripheral Isolator Circuit.
-
Multiple Parameter Optical Liquid Measurement Platform.
-
USB-Powered, 915 MHz RF Low Noise Amplifier Receiver with Overpower Protection Circuit.
-
USB-Powered, 2.4 GHz RF Low Noise Amplifier Receiver with Overpower Protection Circuit.
-
USB-Powered, 5.8 GHz RF Power Amplifier with Overtemperature Management.
-
USB Powered 5.8 GHz RF LNA Receiver with Output Power Protection
-
24-Bit Data Acquisition System for IEPE Sensors.
-
Low/Full/High-Speed USB 2.0 Isolator with Isolated Power.
-
±10 V Analog Input and ±15 V Analog Output for Raspberry Pi Platforms.
-
USB-Powered, 433.92 MHz RF Low Noise Amplifier Receiver with Overpower Protection.
-
Programmable High Current and Voltage Source/Sink Power Supply.
-
Electrical Impedance Tomography Measurement System.
-
10BASE-T1L Field Device Development Platform with Class 12 and 13 SPoE.
-
Analog Front End and Digital Interface for Serial LVDS SAR ADCs.
-
Quad-Channel IEPE Vibration Sensor Measurement System.
-
Configurable USB-C Power Sink Solution.
-
USB 3.0 Quad-Channel IEPE Vibration Sensor Measurement System.
-
Multistandard Micropower Verified Smoke Detection System-on-Module.
-
Precision Low Latency Development Kit.
-
Quad Channel, Low Latency, Data Acquisition and Signal Generation Module.
-
DC to 10 kHz MEMS-Based IEPE Vibration Sensor.
-
Scalable BMS Kit for Cell and Pack Monitoring.
-
Low-cost Integrated BMS Monitor with On-board MCU and Dual isoSPI.
EVAL-LTPA-KIT (LTpowerAnalyzer Kit)
Low-cost, High Performance, Compact Laboratory Tool for Evaluating and Characterizing Power Supply Designs.
-
Feather to PMOD Adaptor Board.